TROSynapseSuperHTTPServer

 

Standard component constructor

constructor Create(aOwner: TComponent)

Parameters:

• aOwner: Owner

---

property AccessControlMaxAge: Integer read write

---

Toggles whether the server ready to receive requests from clients. Depending on the server type, changing this property might open/close a network socket or otherwise toggle whether the server will process incoming requests.

property Active: Boolean read write

---

Copies the contents of another, similar object.

procedure Assign(Source: TPersistent)

Parameters:

• Source: Instance whose properties will be copied

---

This property is used by the server to automatically sign new clients up to the event repository, thus making it possible for them to receive events without manual registration. The default value is true.

property AutoRegisterSession: Boolean read write

---

Determines whether it is allowed to use IPv4 network addresses.

property BindV4: Boolean read write

---

Gets or sets the flag indicating whether the server should listen for IPv6 connections.

Setting this flag doesn't have any immediate effect. Its value is used only when the server is opened (either by setting the Active property to true).

property BindV6: Boolean read write

---

Validates the server properties.

procedure CheckProperties

---

Closes the specified connection when overridden.

procedure CloseConnection(aConnection: IROHTTPClientCapabilities)

Parameters:

• aConnection: Specified connection

---

The timeout, in seconds, after which the idle connection will be closed.

The default value is 300 (i.e. 5 minutes).

property ConnectionTimeout: Integer read write

---

Decrypt stream

procedure DecryptStream(const Source: TStream; const Dest: TStream)

Parameters:

• Source: Source
• Dest: Destination

---

Decrypt stream

procedure DecryptStream(const Stream: TStream)

Parameters:

• Stream: Stream

---

Holds the message that will be sent back to the client if it improperly "welcomes" the server.

property DefaultResponse: string read write

---

Controls whether data packets are sent individually or if small packets are held back to send as part of fewer larger data packets. Normally, you will want this disabled as it can have a significant effect on performance. The only time when its worth keeping the property enabled is when there are many small packets to be sent and you need to keep network bandwidth to a minimum.

See more at Nagle's algorithm

property DisableNagle: Boolean read write

---

Specifies how incoming requests will be processed and dispatched. Depending on the server type, one or multiple dispatchers can be configured to receive messages from the client. Each dispatcher consists of a Message and an optional Name. Also, each dispatcher can be individually enabled or disabled. Each server must have at least one dispatcher configured, in order to be able to process messages.

=Essential Sub-Properties=

• Message specifies the message format to be used for this dispatcher.
• Name specifies the name, or possibly the URL for the dispatcher.

In HTTP based servers (such as the TROIndyHTTPServer, the Name will be appended as folder to the server URL allowing the server to make multiple dispatchers available at different URLs.

property Dispatchers: TROMessageDispatchers read write

---

function DispatchMessage(const aTransport: IROTransport; aRequestStream: TStream; aResponseStream: TStream): Boolean

Parameters:

• aTransport:
• aRequestStream:
• aResponseStream:

---

function DispatchMessage(const aTransport: IROTransport; aRequestStream: TStream; aResponseStream: TStream; out oResponseOptions: TROResponseOptions): Boolean

Parameters:

• aTransport:
• aRequestStream:
• aResponseStream:
• oResponseOptions:

---

Activates the current HTTP server.

procedure DoActivate

---

procedure DoBeforeDecryptEvent(aEncryptedStream: TStream)

Parameters:

• aEncryptedStream: Stream

---

Processes CORS requests.

function DoCORSSupport(const aRequest: IUnknown; const aResponse: IROHTTPResponse): Boolean

Parameters:

• aRequest: Request
• aResponse: Response

---

Deactivates the current HTTP server.

procedure DoDeactivate

---

procedure DoGetCustomClientAccessPolicy(var aPolicyContent: string)

Parameters:

• aPolicyContent:

---

Generates documentation if correspondent request is detected

function DoProcessDocs(const aRequest: IUnknown; const aResponse: IROHTTPResponse; const aResponseStream: TStream; const aRoot: string; const aSub: string): Boolean

Parameters:

• aRequest: Request
• aResponse: Response
• aResponseStream: Response stream
• aRoot: Root (part before ?)
• aSub: Query string (part after ?)

---

This is DES based enscryption, it is obsolete because works only for Delphi. Use message envelope AES Encryption Envelope instead.

property Encryption: TROEncryption read write

---

Encrypt stream

procedure EncryptStream(const Source: TStream; const Dest: TStream)

Parameters:

• Source: Source
• Dest: Destination

---

Encrypt stream

procedure EncryptStream(const Stream: TStream)

Parameters:

• Stream: Stream

---

Represents the specified event repository object for the current server.

property EventRepository: TROEventRepository read write

---

List of extended dispatchers attached to the server channel instance.

Extended dispatchers are dispatchers that perform special tasks other than calling server services. A good example of an extended dispatcher is TROJavaScriptHttpDispatcher dispatcher.

property ExtendedDispatchers: TROExtendedHTTPDispatcherList read

---

Returns CA certificate

function GetCACertificate: string

---

Returns TROMessageDispatchers class

function GetDispatchersClass: TROMessageDispatchersClass

---

function GetRODLReader: TROCustomRODLReader

---

Returns SSL state

function GetSecure: Boolean

---

Returns rstSuperHTTP. This property is used by the ZeroConf infrastructure.

function GetServerType: TROServerType

---

function GetServiceMetaData(aServiceName: string; aOptions: string; out aContentType: string): TStream

Parameters:

• aServiceName:
• aOptions:
• aContentType:

---

Returns itself.

function GetTransportObject: TObject

---

Processes Extended Dispatcher requests.

function HandleExtendedDispatchers(const aRoot: string; const aTransport: IROHTTPTransport; const aRequest: IUnknown; const aResponse: IROHTTPResponse; const aRequestData: TStream; const aResponseData: TStream): Boolean

Parameters:

• aRoot: Path Info
• aTransport: Transport channel
• aRequest: Request
• aResponse: Response
• aRequestData: Request stream
• aResponseData: Response stream

---

Gets or sets a flag indicating whether the server should accept plain Http requests to the services exposed by the server.

property HandlePlainRequests: Boolean read write

---

Processes incoming HTTP requests and performs requested actions (service method call, RODL request, etc.).

procedure HandleRequest(aTarget: IROHTTPClientCapabilities; aRequestHeaders: TIPHTTPRequestHeaders; aRequest: TBytes)

Parameters:

• aTarget: Target to send the response to
• aRequestHeaders: Collection of request headers
• aRequest: Client's request

---

This method will be overridden to process HTTP requests with a path, containing an unknown message dispatcher.

function HandleUnknownRequest(aTarget: IROHTTPClientCapabilities; aRequest: TIPHTTPRequestHeaders; aData: TBytes): Boolean

Parameters:

• aTarget: Target to send the response to
• aRequest: Collection of request headers
• aData: Body of the request

---

function IntDispatchMessage(Dispatcher: TROMessageDispatcher; const aTransport: IROTransport; aRequestStream: TStream; aResponseStream: TStream; out oResponseOptions: TROResponseOptions): Boolean

Parameters:

• Dispatcher:
• aTransport:
• aRequestStream:
• aResponseStream:
• oResponseOptions:

---

Checks if encryption was used

function IsEncryptionUsed: Boolean

---

function IsServiceAllowed(Value: string): Boolean

Parameters:

• Value:

---

Checks state of stream

function IsStreamEncrypted(Source: TStream): Boolean

Parameters:

• Source: Stream

---

Sets the maximum size of data package that the server will receive (default is 10485760, i.e. 10MB). This is to prevent a larger package than intended from being sent to the server.

property MaxPackageSize: Integer read write

---

Determines the maximum length of client's request data (checks the value of the request Content-Length header). By default, this property equals 10MB.

property MaxPostData: Integer read write

---

The minimal size when GZIP encoding will be used (default is 4096 bytes)

property MinSizeForGzipEncoding: Integer read write

---

Forwards notification messages to all owned components.

procedure Notification(AComponent: TComponent; Operation: TOperation)

Parameters:

• AComponent: component
• Operation: operation

---

Fired after stream was encrypted

property OnAfterEncrypt: TROBaseConnectionOperation read write
delegate:  procedure OnAfterEncrypt(Sender: TROBaseConnection; aEncryptedStream: TStream)

---

Fires after the server has been activated.

property OnAfterServerActivate: TNotifyEvent read write

---

Fires after the server has been deactivated. You can use this event handler to perform any cleanup you might need after the server has stopped processing new requests.

property OnAfterServerDeactivate: TNotifyEvent read write

---

Fired before stream will be decrypted

property OnBeforeDecrypt: TROBaseConnectionOperation read write
delegate:  procedure OnBeforeDecrypt(Sender: TROBaseConnection; aEncryptedStream: TStream)

---

Fires just before the server is activated. You can use this event handler to perform any initialization you might need before the server starts processing new requests.

property OnBeforeServerActivate: TNotifyEvent read write

---

Fires just before the server is deactivated. You can use this event handler to perform any cleanup you might need before the server stops processing new requests.

property OnBeforeServerDeactivate: TNotifyEvent read write

---

This event is fired when SendClientAccessPolicyXml is set to captCustom. Allows more precise management of client access policies.

The handler of this event generates a valid ClientAccessPolicy.xml and puts it to the aPolicyContent parameter.

property OnGetCustomClientAccessPolicy: TROCustomClientAccessPolicyMethod read write
delegate:  procedure OnGetCustomClientAccessPolicy(aSender: TObject; var aPolicyContent: ROUTF8String)

---

property OnGetRODLReader: TROGetRODLReader read write

---

Allows to customize the binding of the server to the host's IP addresses. By default the server is bound to all addresses available. When this event is handled by the user code no automatic binding is performed, the binding becomes user's responsibility.

property OnManualBindSocket: TNotifyEvent read write

---

Fires after a stream with a request message has been received from the client. The event handler can inspect and possibly modify the stream, before it continues to be processed by the higher levels of the Remoting SDK framework.

property OnReadFromStream: TStreamOperation read write
delegate:  procedure OnReadFromStream(aStream: TStream)

---

This event is fired when server channel receives OPTIONS request. This event allows more precise management of cross-origin client access policies.

property OnSendCrossOriginHeader: TROHTTPSendCrossOriginHeader read write
delegate:  procedure OnSendCrossOriginHeader(var AllowedOrigin: string)

---

property OnSendCrossOriginHeaderEx: TROHTTPSendCrossOriginHeaderEx read write
delegate:  function OnSendCrossOriginHeaderEx(var Cors: TROCorsStruct): Boolean

---

property OnUnknownRequest: TIPAsyncHTTPRequestHandler read write
delegate:  procedure OnUnknownRequest(Sender: TObject; aContext: IIPAsyncContext)

---

Fires just before a stream with a response message is sent back to the client. The event handler can inspect and possibly modify the stream, before it continues to be sent off to the client.

property OnWriteToStream: TStreamOperation read write
delegate:  procedure OnWriteToStream(aStream: TStream)

---

Parses PathInfo and splits it to root and query

procedure ParsePathInfo(const aPathInfo: string; var aRoot: string; var aSub: string)

Parameters:

• aPathInfo: PathInfo
• aRoot: Root (part after ?)
• aSub: Query string (part after ?)

---

Specifies the TCP port that the server is listening on. By default, the Remoting SDK HTTP Servers use port 8099 to avoid conflicts with existing web servers running on port 80, but you can change this to any other value that is available on your system.

property Port: Integer read write

---

Register Extended HTTP Dispatcher

procedure Register(aDispatcher: IROHTTPDispatcher)

Parameters:

• aDispatcher: Extended HTTP Dispatcher

---

This method should be called by the descendants when a response has not successfully been sent.

procedure ResponseFailed(aUserData: IInterface)

Parameters:

• aUserData: Specified failed message

---

Does nothing.

procedure ResponseSucessful(aUserData: IInterface)

Parameters:

• aUserData: Specified user data

---

Forwards notification messages to all owned components.

procedure ROFreeNotification(aComponent: TComponent)

Parameters:

• aComponent: component

---

Forwards notification messages to all owned components.

procedure RORemoveFreeNotification(aComponent: TComponent)

Parameters:

• aComponent: component

---

Gets or sets the intended server behavior when the ClientAccessPolicy.xml file (security policy file) is requested.

Possible values are:

• captAllowNone - All requests are denied.
• captAllowAll - All requests are allowed.
• captCustom - Custom request policy is applied. Custom security policy file is generated via the OnGetCustomClientAccessPolicy event handler.

property SendClientAccessPolicyXml: TROClientAccessPolicyType read write

---

Gets or sets a flag indicating whether the server should handle the incoming CORS requests or ignore them.

property SendCrossOriginHeader: Boolean read write

---

Forwards notification messages to all owned components.

procedure SendRemoveNotification(aComponent: TComponent)

Parameters:

• aComponent: component

---

Sends an HTTP response data back to the client when overridden.

procedure SendResponse(aTarget: IROHTTPClientCapabilities; aHeaders: TIPHTTPResponseHeaders; aData: TBytes; UserData: IInterface; aUseGZIPEncoding: Boolean)

Parameters:

• aTarget: Target to send the response to
• aHeaders: Collection of response headers
• aData: HTTP response data
• UserData: User data information
• aUseGZIPEncoding: Use GZIP encoding or not.

---

Specifies whether the HTTP server will serve up a page with human-readable information about the server when being accessed from a web browser. This information page will contain details about the registered dispatchers and the documentation for the services.

property ServeInfoPage: Boolean read write

---

property ServerName: string read write

---

Specifies whether the server will make the contained RODL file available to clients (true, default) or not. Keep this property set to true if clients need to access the RODL (or WSDL), for example so that third parties (including Service Tester) can import services. Set it to false if you do not want to provide this information, for example for security reasons.

property ServeRodl: Boolean read write

---

Allows to get/set Service Groups

property ServiceGroup: string read write

---

Sets the default HTTP headers of the response when overridden.

procedure SetDefaultHeaders(aTarget: IROHTTPClientCapabilities; aHeaders: TIPHTTPResponseHeaders)

Parameters:

• aTarget: Target to send the response to
• aHeaders: Collection of HTTP headers

---

property SocketTimeout: Integer read write

---

Allows to set a custom thread pool object to process incoming requests using a set of threads. When not assigned explicitly the thread pool is created and assigned automatically. Assigning this property by users is a rare need, this is required only when precise and/or custom control over processing threads is necessary.

property ThreadPool: TROThreadPool read write

---

Fires the OnReadFromStream event

procedure TriggerReadFromStream(aSource: TStream)

Parameters:

• aSource: stream

---

Fires the OnReadFromStream event

procedure TriggerWriteToStream(aDest: TStream)

Parameters:

• aDest: stream

---

Encodes data with GZIP encription is needed

procedure TryEncodeData(aTarget: IROHTTPClientCapabilities; aHeaders: TIPHTTPResponseHeaders; aSourceData: TBytes; out aDestData: TBytes; aUseGZIPEncoding: Boolean)

Parameters:

• aTarget: Target to send the response to
• aHeaders: Response headers
• aSourceData: Source
• aDestData: Destination
• aUseGZIPEncoding: Use GZIP encoding

---

Unregister Extended HTTP Dispatcher

procedure Unregister(aDispatcher: IROHTTPDispatcher)

Parameters:

• aDispatcher: Extended HTTP Dispatcher

 

property AccessControlMaxAge: Integer read write

---

Toggles whether the server ready to receive requests from clients. Depending on the server type, changing this property might open/close a network socket or otherwise toggle whether the server will process incoming requests.

property Active: Boolean read write

---

This property is used by the server to automatically sign new clients up to the event repository, thus making it possible for them to receive events without manual registration. The default value is true.

property AutoRegisterSession: Boolean read write

---

Determines whether it is allowed to use IPv4 network addresses.

property BindV4: Boolean read write

---

Gets or sets the flag indicating whether the server should listen for IPv6 connections.

Setting this flag doesn't have any immediate effect. Its value is used only when the server is opened (either by setting the Active property to true).

property BindV6: Boolean read write

---

The timeout, in seconds, after which the idle connection will be closed.

The default value is 300 (i.e. 5 minutes).

property ConnectionTimeout: Integer read write

---

Holds the message that will be sent back to the client if it improperly "welcomes" the server.

property DefaultResponse: string read write

---

Controls whether data packets are sent individually or if small packets are held back to send as part of fewer larger data packets. Normally, you will want this disabled as it can have a significant effect on performance. The only time when its worth keeping the property enabled is when there are many small packets to be sent and you need to keep network bandwidth to a minimum.

See more at Nagle's algorithm

property DisableNagle: Boolean read write

---

Specifies how incoming requests will be processed and dispatched. Depending on the server type, one or multiple dispatchers can be configured to receive messages from the client. Each dispatcher consists of a Message and an optional Name. Also, each dispatcher can be individually enabled or disabled. Each server must have at least one dispatcher configured, in order to be able to process messages.

=Essential Sub-Properties=

• Message specifies the message format to be used for this dispatcher.
• Name specifies the name, or possibly the URL for the dispatcher.

In HTTP based servers (such as the TROIndyHTTPServer, the Name will be appended as folder to the server URL allowing the server to make multiple dispatchers available at different URLs.

property Dispatchers: TROMessageDispatchers read write

---

This is DES based enscryption, it is obsolete because works only for Delphi. Use message envelope AES Encryption Envelope instead.

property Encryption: TROEncryption read write

---

Represents the specified event repository object for the current server.

property EventRepository: TROEventRepository read write

---

List of extended dispatchers attached to the server channel instance.

Extended dispatchers are dispatchers that perform special tasks other than calling server services. A good example of an extended dispatcher is TROJavaScriptHttpDispatcher dispatcher.

property ExtendedDispatchers: TROExtendedHTTPDispatcherList read

---

Gets or sets a flag indicating whether the server should accept plain Http requests to the services exposed by the server.

property HandlePlainRequests: Boolean read write

---

Sets the maximum size of data package that the server will receive (default is 10485760, i.e. 10MB). This is to prevent a larger package than intended from being sent to the server.

property MaxPackageSize: Integer read write

---

Determines the maximum length of client's request data (checks the value of the request Content-Length header). By default, this property equals 10MB.

property MaxPostData: Integer read write

---

The minimal size when GZIP encoding will be used (default is 4096 bytes)

property MinSizeForGzipEncoding: Integer read write

---

property OnGetRODLReader: TROGetRODLReader read write

---

Specifies the TCP port that the server is listening on. By default, the Remoting SDK HTTP Servers use port 8099 to avoid conflicts with existing web servers running on port 80, but you can change this to any other value that is available on your system.

property Port: Integer read write

---

Gets or sets the intended server behavior when the ClientAccessPolicy.xml file (security policy file) is requested.

Possible values are:

• captAllowNone - All requests are denied.
• captAllowAll - All requests are allowed.
• captCustom - Custom request policy is applied. Custom security policy file is generated via the OnGetCustomClientAccessPolicy event handler.

property SendClientAccessPolicyXml: TROClientAccessPolicyType read write

---

Gets or sets a flag indicating whether the server should handle the incoming CORS requests or ignore them.

property SendCrossOriginHeader: Boolean read write

---

Specifies whether the HTTP server will serve up a page with human-readable information about the server when being accessed from a web browser. This information page will contain details about the registered dispatchers and the documentation for the services.

property ServeInfoPage: Boolean read write

---

property ServerName: string read write

---

Specifies whether the server will make the contained RODL file available to clients (true, default) or not. Keep this property set to true if clients need to access the RODL (or WSDL), for example so that third parties (including Service Tester) can import services. Set it to false if you do not want to provide this information, for example for security reasons.

property ServeRodl: Boolean read write

---

Allows to get/set Service Groups

property ServiceGroup: string read write

---

property SocketTimeout: Integer read write

---

Allows to set a custom thread pool object to process incoming requests using a set of threads. When not assigned explicitly the thread pool is created and assigned automatically. Assigning this property by users is a rare need, this is required only when precise and/or custom control over processing threads is necessary.

property ThreadPool: TROThreadPool read write

 

Standard component constructor

constructor Create(aOwner: TComponent)

Parameters:

• aOwner: Owner

---

Copies the contents of another, similar object.

procedure Assign(Source: TPersistent)

Parameters:

• Source: Instance whose properties will be copied

---

Validates the server properties.

procedure CheckProperties

---

Closes the specified connection when overridden.

procedure CloseConnection(aConnection: IROHTTPClientCapabilities)

Parameters:

• aConnection: Specified connection

---

Decrypt stream

procedure DecryptStream(const Source: TStream; const Dest: TStream)

Parameters:

• Source: Source
• Dest: Destination

---

Decrypt stream

procedure DecryptStream(const Stream: TStream)

Parameters:

• Stream: Stream

---

function DispatchMessage(const aTransport: IROTransport; aRequestStream: TStream; aResponseStream: TStream): Boolean

Parameters:

• aTransport:
• aRequestStream:
• aResponseStream:

---

function DispatchMessage(const aTransport: IROTransport; aRequestStream: TStream; aResponseStream: TStream; out oResponseOptions: TROResponseOptions): Boolean

Parameters:

• aTransport:
• aRequestStream:
• aResponseStream:
• oResponseOptions:

---

Activates the current HTTP server.

procedure DoActivate

---

procedure DoBeforeDecryptEvent(aEncryptedStream: TStream)

Parameters:

• aEncryptedStream: Stream

---

Processes CORS requests.

function DoCORSSupport(const aRequest: IUnknown; const aResponse: IROHTTPResponse): Boolean

Parameters:

• aRequest: Request
• aResponse: Response

---

Deactivates the current HTTP server.

procedure DoDeactivate

---

procedure DoGetCustomClientAccessPolicy(var aPolicyContent: string)

Parameters:

• aPolicyContent:

---

Generates documentation if correspondent request is detected

function DoProcessDocs(const aRequest: IUnknown; const aResponse: IROHTTPResponse; const aResponseStream: TStream; const aRoot: string; const aSub: string): Boolean

Parameters:

• aRequest: Request
• aResponse: Response
• aResponseStream: Response stream
• aRoot: Root (part before ?)
• aSub: Query string (part after ?)

---

Encrypt stream

procedure EncryptStream(const Source: TStream; const Dest: TStream)

Parameters:

• Source: Source
• Dest: Destination

---

Encrypt stream

procedure EncryptStream(const Stream: TStream)

Parameters:

• Stream: Stream

---

Returns CA certificate

function GetCACertificate: string

---

Returns TROMessageDispatchers class

function GetDispatchersClass: TROMessageDispatchersClass

---

function GetRODLReader: TROCustomRODLReader

---

Returns SSL state

function GetSecure: Boolean

---

Returns rstSuperHTTP. This property is used by the ZeroConf infrastructure.

function GetServerType: TROServerType

---

function GetServiceMetaData(aServiceName: string; aOptions: string; out aContentType: string): TStream

Parameters:

• aServiceName:
• aOptions:
• aContentType:

---

Returns itself.

function GetTransportObject: TObject

---

Processes Extended Dispatcher requests.

function HandleExtendedDispatchers(const aRoot: string; const aTransport: IROHTTPTransport; const aRequest: IUnknown; const aResponse: IROHTTPResponse; const aRequestData: TStream; const aResponseData: TStream): Boolean

Parameters:

• aRoot: Path Info
• aTransport: Transport channel
• aRequest: Request
• aResponse: Response
• aRequestData: Request stream
• aResponseData: Response stream

---

Processes incoming HTTP requests and performs requested actions (service method call, RODL request, etc.).

procedure HandleRequest(aTarget: IROHTTPClientCapabilities; aRequestHeaders: TIPHTTPRequestHeaders; aRequest: TBytes)

Parameters:

• aTarget: Target to send the response to
• aRequestHeaders: Collection of request headers
• aRequest: Client's request

---

This method will be overridden to process HTTP requests with a path, containing an unknown message dispatcher.

function HandleUnknownRequest(aTarget: IROHTTPClientCapabilities; aRequest: TIPHTTPRequestHeaders; aData: TBytes): Boolean

Parameters:

• aTarget: Target to send the response to
• aRequest: Collection of request headers
• aData: Body of the request

---

function IntDispatchMessage(Dispatcher: TROMessageDispatcher; const aTransport: IROTransport; aRequestStream: TStream; aResponseStream: TStream; out oResponseOptions: TROResponseOptions): Boolean

Parameters:

• Dispatcher:
• aTransport:
• aRequestStream:
• aResponseStream:
• oResponseOptions:

---

Checks if encryption was used

function IsEncryptionUsed: Boolean

---

function IsServiceAllowed(Value: string): Boolean

Parameters:

• Value:

---

Checks state of stream

function IsStreamEncrypted(Source: TStream): Boolean

Parameters:

• Source: Stream

---

Forwards notification messages to all owned components.

procedure Notification(AComponent: TComponent; Operation: TOperation)

Parameters:

• AComponent: component
• Operation: operation

---

Parses PathInfo and splits it to root and query

procedure ParsePathInfo(const aPathInfo: string; var aRoot: string; var aSub: string)

Parameters:

• aPathInfo: PathInfo
• aRoot: Root (part after ?)
• aSub: Query string (part after ?)

---

Register Extended HTTP Dispatcher

procedure Register(aDispatcher: IROHTTPDispatcher)

Parameters:

• aDispatcher: Extended HTTP Dispatcher

---

This method should be called by the descendants when a response has not successfully been sent.

procedure ResponseFailed(aUserData: IInterface)

Parameters:

• aUserData: Specified failed message

---

Does nothing.

procedure ResponseSucessful(aUserData: IInterface)

Parameters:

• aUserData: Specified user data

---

Forwards notification messages to all owned components.

procedure ROFreeNotification(aComponent: TComponent)

Parameters:

• aComponent: component

---

Forwards notification messages to all owned components.

procedure RORemoveFreeNotification(aComponent: TComponent)

Parameters:

• aComponent: component

---

Forwards notification messages to all owned components.

procedure SendRemoveNotification(aComponent: TComponent)

Parameters:

• aComponent: component

---

Sends an HTTP response data back to the client when overridden.

procedure SendResponse(aTarget: IROHTTPClientCapabilities; aHeaders: TIPHTTPResponseHeaders; aData: TBytes; UserData: IInterface; aUseGZIPEncoding: Boolean)

Parameters:

• aTarget: Target to send the response to
• aHeaders: Collection of response headers
• aData: HTTP response data
• UserData: User data information
• aUseGZIPEncoding: Use GZIP encoding or not.

---

Sets the default HTTP headers of the response when overridden.

procedure SetDefaultHeaders(aTarget: IROHTTPClientCapabilities; aHeaders: TIPHTTPResponseHeaders)

Parameters:

• aTarget: Target to send the response to
• aHeaders: Collection of HTTP headers

---

Fires the OnReadFromStream event

procedure TriggerReadFromStream(aSource: TStream)

Parameters:

• aSource: stream

---

Fires the OnReadFromStream event

procedure TriggerWriteToStream(aDest: TStream)

Parameters:

• aDest: stream

---

Encodes data with GZIP encription is needed

procedure TryEncodeData(aTarget: IROHTTPClientCapabilities; aHeaders: TIPHTTPResponseHeaders; aSourceData: TBytes; out aDestData: TBytes; aUseGZIPEncoding: Boolean)

Parameters:

• aTarget: Target to send the response to
• aHeaders: Response headers
• aSourceData: Source
• aDestData: Destination
• aUseGZIPEncoding: Use GZIP encoding

---

Unregister Extended HTTP Dispatcher

procedure Unregister(aDispatcher: IROHTTPDispatcher)

Parameters:

• aDispatcher: Extended HTTP Dispatcher

 

Fired after stream was encrypted

property OnAfterEncrypt: TROBaseConnectionOperation read write
delegate:  procedure OnAfterEncrypt(Sender: TROBaseConnection; aEncryptedStream: TStream)

---

Fires after the server has been activated.

property OnAfterServerActivate: TNotifyEvent read write

---

Fires after the server has been deactivated. You can use this event handler to perform any cleanup you might need after the server has stopped processing new requests.

property OnAfterServerDeactivate: TNotifyEvent read write

---

Fired before stream will be decrypted

property OnBeforeDecrypt: TROBaseConnectionOperation read write
delegate:  procedure OnBeforeDecrypt(Sender: TROBaseConnection; aEncryptedStream: TStream)

---

Fires just before the server is activated. You can use this event handler to perform any initialization you might need before the server starts processing new requests.

property OnBeforeServerActivate: TNotifyEvent read write

---

Fires just before the server is deactivated. You can use this event handler to perform any cleanup you might need before the server stops processing new requests.

property OnBeforeServerDeactivate: TNotifyEvent read write

---

This event is fired when SendClientAccessPolicyXml is set to captCustom. Allows more precise management of client access policies.

The handler of this event generates a valid ClientAccessPolicy.xml and puts it to the aPolicyContent parameter.

property OnGetCustomClientAccessPolicy: TROCustomClientAccessPolicyMethod read write
delegate:  procedure OnGetCustomClientAccessPolicy(aSender: TObject; var aPolicyContent: ROUTF8String)

---

Allows to customize the binding of the server to the host's IP addresses. By default the server is bound to all addresses available. When this event is handled by the user code no automatic binding is performed, the binding becomes user's responsibility.

property OnManualBindSocket: TNotifyEvent read write

---

Fires after a stream with a request message has been received from the client. The event handler can inspect and possibly modify the stream, before it continues to be processed by the higher levels of the Remoting SDK framework.

property OnReadFromStream: TStreamOperation read write
delegate:  procedure OnReadFromStream(aStream: TStream)

---

This event is fired when server channel receives OPTIONS request. This event allows more precise management of cross-origin client access policies.

property OnSendCrossOriginHeader: TROHTTPSendCrossOriginHeader read write
delegate:  procedure OnSendCrossOriginHeader(var AllowedOrigin: string)

---

property OnSendCrossOriginHeaderEx: TROHTTPSendCrossOriginHeaderEx read write
delegate:  function OnSendCrossOriginHeaderEx(var Cors: TROCorsStruct): Boolean

---

property OnUnknownRequest: TIPAsyncHTTPRequestHandler read write
delegate:  procedure OnUnknownRequest(Sender: TObject; aContext: IIPAsyncContext)

---

Fires just before a stream with a response message is sent back to the client. The event handler can inspect and possibly modify the stream, before it continues to be sent off to the client.

property OnWriteToStream: TStreamOperation read write
delegate:  procedure OnWriteToStream(aStream: TStream)